2-LOW KIT - BD ('09-'22, SEE DESCRIPTION, 4WD)
This kit is designed to allow the '09-'22, Ram truck owners to manually disable the front wheel drive mechanism by holding the hubs free (2WD) mode with the transfer case in 4WD-Low range. Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only.
With this BD kit installed, the front wheels will NOT be driven through the transfer case.
'19-'22, 4500/5500
'13-'22 Ram 3500
'14-'22 Ram 2500
'09-'22 Ram 1500
With this BD kit installed, the front wheels will NOT be driven through the transfer case.
- Installation is simple, the kit plugs in below the glove box
- No wire cutting or splicing and no wires through the firewall
- Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden
- Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
- By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
- This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
'19-'22, 4500/5500
'13-'22 Ram 3500
'14-'22 Ram 2500
'09-'22 Ram 1500
Write Your Own Review
Install and Tech Information
Videos
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Featured Products
-
T-SHIRT - LONG LIVE THE DIESEL TRUCKAs low as $14.95 -
T-SHIRT - SURE, MY TRUCK'S A HYBRIDAs low as $16.95
-
T-SHIRT, GENO'S GARAGE, SHORT SLEEVE, GRAY (WICKING MATERIAL)As low as $16.95
-
T-SHIRT - O SAY CAN YOU "C" FLAG SHIRTAs low as $16.95
