New site under construction. Please visit genosgarage.com to place an order.

My Cart 0
$0.00
Call Us: (770) 886-2500

SERPENTINE BELT (ASSUMES A/C) - GATES ('89-'91, 5.9L)

In stock
SKU
GATES-K080816
Views: 0
$33.95
The Gates Micro-V K080816 serpentine belt for your '89-'91 Dodge Cummins Turbo Diesel truck is designed to be the quietest and highest performing belts in the industry. For trucks with air-conditioning.

With this belt you get:

  • Special belt constructions eliminate belt noise, reduce tension loss and solve problem drive applications.
  • Last 50%-60% longer than value line belts.
  • Precision ground to assure optimum belt-to-pulley fit.
  • Special formation process for precise dimensional control.
  • Reinforced with stretch-resistant, thermally active polyester tensile members.
  • Meets or exceeds SAE J1459 specifications.
You should check the serpentine belt at every oil change for cracks and chunks missing out of it and general wear. If you see these, it is time to replace the belt. A Gates belt wear gauge is included with the purchase of this belt.

While the belt is off for replacement, give the belt tensioner pulley a spin and listen for bearing noises. A squealing belt can be a sign that the belt tensioner is failing and causing belt misalignment.



BE SYSTEM SMART
The best way to prevent belt failure is to Be System Smart and think I60 & R90. Inspect the serpentine system at 60K miles and replace worn components by 90K miles or as advised by the manufacturer.

Write Your Own Review
You're reviewing:SERPENTINE BELT (ASSUMES A/C) - GATES ('89-'91, 5.9L)
Your Rating

Install and Tech Information

Videos

Warning Sign WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov