TRACK BAR BUSHING KIT - LUKE'S LINK ('03-'07)
One of the weakest points on the '03-'07 Dodge Ram suspension is the trackbar and tie rod ends. Installing these polyurethane bushings will tighten up the bar-to-frame connection which will make a lot of difference in the way your truck drives.
This bushing kit includes a pair of bushings to do both sides of the trackbar. Factory hardware will be reused.
You will need an 18mm socket to remove the trackbar bolts. Best to have this in your toolbox before you get started so you won't have to make an unplanned trip to the hardware store. Access to a press to push the old bushings out will save a lot of time and effort on this job.
NOTE: These replacement bushings work on trucks with a build date up to 03/18/07. They WILL NOT work on trucks built after 03/18/07.
This bushing kit includes a pair of bushings to do both sides of the trackbar. Factory hardware will be reused.
You will need an 18mm socket to remove the trackbar bolts. Best to have this in your toolbox before you get started so you won't have to make an unplanned trip to the hardware store. Access to a press to push the old bushings out will save a lot of time and effort on this job.
NOTE: These replacement bushings work on trucks with a build date up to 03/18/07. They WILL NOT work on trucks built after 03/18/07.
Write Your Own Review
Install and Tech Information
Luke's Link Trackbar Rebuild Kit Instructions.pdfVideos
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Featured Products
-
T-SHIRT - LONG LIVE THE DIESEL TRUCKAs low as $14.95 -
T-SHIRT - SURE, MY TRUCK'S A HYBRIDAs low as $16.95
-
T-SHIRT, GENO'S GARAGE, SHORT SLEEVE, GRAY (WICKING MATERIAL)As low as $16.95
-
T-SHIRT - O SAY CAN YOU "C" FLAG SHIRTAs low as $16.95
