New site under construction. Please visit genosgarage.com to place an order.

My Cart 0
$0.00
Call Us: (770) 886-2500

DIFFERENTIAL COVER - MAG-HYTEC - FRONT/VENTED ('02, DANA 60)

In stock
SKU
MH-DA60-VENT
Views: 0
$341.00
Mag-Hytec's Dana 60 Vented front differential cover for the 2002 Dodge Ram adds a quart of capacity over the stock cover (up from 3-3.5 quarts stock to 4-4.5 quarts). It is a perfect match in appearance and function to the rear differential covers.

  • Magnetic drain plug and anodized aluminum dipstick with magnetic insert
  • O-rings require no gaskets or sealant
  • Routine lube maintenance without removing the differential cover
  • 1/8 NPT temperature sender port
  • 303 stainless steel hardware
  • Lube level reference plug
  • Finned aircraft aluminum housing
  • Requires allen key wrenches (included) for installation and service
  • Fits with most factory suspension systems and aftermarket anti-sway bars
Perhaps the most important feature for off-road use of your four wheel drive Dodge Ram is the angled ramp on the bottom half of the cover, instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.

CAUTION: Installation of this cover is just a bit more involved than for the other Mag-Hytec differential covers. You need to pop the driver's side tie rod end loose from the steering knuckle to give clearance between the ring gear and the steering rod.

NOTE: Fits '02 Dodge with vented differential cover only
Write Your Own Review
You're reviewing:DIFFERENTIAL COVER - MAG-HYTEC - FRONT/VENTED ('02, DANA 60)
Your Rating

Install and Tech Information

Videos

Warning Sign WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov