TRANSMISSION COOLER - TRANS-COOL ('94-'05, NV4500/NV5600)
The TRANS-COOL patent-pending fin cooling system is uniquely designed to transmit heat from the inner fins to the outer fins, thus dissipating heat from the Dodge Turbo Diesel manual transmission.
Features include:
NOTE: Check for possible clearance problems with larger aftermarket exhaust systems before ordering. You will need a minimum of 4 inches of clearance from the base of the PTO mounting surface.
NOTE: 2005 trucks overlapped transmissions during the model run. To determine whether your truck has a NV4500/5600 or G56 transmission so you can order the correct TRANS-COOL, see the shift patterns below.
Features include:
- Holds an additional quart of transmission fluid.
- Patent-pending aluminum casting 356T6 alloy fins allow for cooling.
- Bolts securely to any 5-speed or 6-speed Dodge truck transmission.
- 1/8" drain plugs
- (2) TRANS-COOL patent pending aluminum casting 356T6 alloy units
- (12) PTO bolts and washers
- (2) PTO gaskets (install new gasket included in system kit)
- (1) 1/8" pipe plug (temperature gauge port with removable plug).
NOTE: Check for possible clearance problems with larger aftermarket exhaust systems before ordering. You will need a minimum of 4 inches of clearance from the base of the PTO mounting surface.
NOTE: 2005 trucks overlapped transmissions during the model run. To determine whether your truck has a NV4500/5600 or G56 transmission so you can order the correct TRANS-COOL, see the shift patterns below.
Write Your Own Review
Install and Tech Information
TRANS-COOL Instructions.pdfVideos
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov