DIFFERENTIAL COVER - MAG-HYTEC - FRONT ('89-'02, DANA 60)

Mag-Hytec's Dana 60 front differential cover for the '89-'02 Dodge Ram adds a quart of capacity over the stock cover (up from 3-3.5 quarts stock to 4-4.5 quarts). It is a perfect match in appearance and function to the rear differential covers.

• Magnetic drain plug and anodized aluminum dipstick with magnetic insert
• O-rings require no gaskets or sealant
• Routine lube maintenance without removing the differential cover
• 1/8 NPT temperature sender port
• 303 stainless steel hardware
• Lube level reference plug
• Finned aircraft aluminum housing
• Requires allen key wrenches (included) for installation and service
• Fits with most factory suspension systems and aftermarket anti-sway bars

Perhaps the most important feature for off-road use of your four wheel drive Dodge Turbo Diesel is the angled ramp on the bottom half of the cover, instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.

CAUTION: Installation of this cover is just a bit more involved than for the other Mag-Hytec differential covers. You need to pop the driver's side tie rod end loose from the steering knuckle to provide clearance between the ring gear and the steering rod.

NOTE: 2002 Dodge truck owners with vented differential cover, please select part number: MH-DA60-VENT.